Taskline square

To Get prices, please fill all fields

Slim LED batten with polycarbonate housing and diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.
Dimensions :
10W - L:591 mm | W :21.5 mm I H: 37 mm
18W - L:1184 mm | W :21.5 mm I H: 37 mm
22W - L:1184 mm | W :21.5 mm I H: 37 mm
Recommended Usage: Commercial buildings I Residential buildings I Other indoor applications

General specifications
Housing
Made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.White finish end caps with decorative square polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. These end caps are snapfitted to the fixture.
Optics
Polycarbonate diffuser to provide glare free uniform light distribution.High efficiency long life SMD LED module with high lumen efficacy to enhance the lumen output.
Mounting
Can be fixed directly into the wall/ ceiling by means of mounting SS clips provided with the fixture.
Surge Protection
Upto 2.5 KV
IP
20
Technical Specifications
Wattage
10W | 18W | 22W
CCT
6000K | 4000K | 3000K
CRI
80
Rated Voltage
240V AC
Power Factor
0.9
THD
≤ 20%
System Efficacy (lm/W)
100
Master Carton
20 nos.

Integral electronic driver (SMPS based constant current output) with lower THD, Output short circuit protection/Open circuit protection, Surge Voltage Protection and other Safety tests.